| |
Model
No. : DYTB-37/45/55/61 |
|
 |
| |
- It is a high speed Rotary Tablet Press for higher table
output, suitable for large batch production.
- Machine is having a square design with full consideration
of GMP standards.
- All the tablet parameters can be fine tuned during the operation
of the machine from outside the tableting zone.
- The machine is having elegantly designed cabinet top of
SS-304.
- The machine is having A. C. variable frequency drive for
force feeding motors, which enables operators to synchronize
machine's speed & feed both.
- The machine is having Electromagnetic clutch arrangements.
- The machine is having one piece turret of special grade
casting. However, three piece turret with SS-304 / SS-316
middle plate is also available (optionally). Electro less
nickel plating can be available to the turret (optionally).
- Lower punch seals are provided at lower punch hole in turret.
- The machine is having helical gear ring to drive the turret.
- The machine is having hard chrome plated, MS Fabricated
Upper Roll Carriers.
- The machine is having ball bearing type Upper & Lower
Pressure Rolls.
- The machine is having specially designed Pressure Link Assly,
which ensures sufficient & equal pressure to the tablets.
- The machine is having tablet weight consistency.
- The machine is having sturdy Aluminium section framed, Acrylic
guards with SS Hinges & Handle & are also fitted with
Gas Filled Sock absorbers.
- The lower guard of the machine are of SS-304 material having
excellent matt finish.
- All guards are interlocked for safety.
- There is no colour part in tablet manufacturing zone &
all other parts are either of SS 304 material or Gunmetal
or of hard chrome plated. All hardware are used of SS-304
quality in tablet manufacturing zone.
- The machine is having center Drive Type Gear Box.
- The machine is having Hydraulic accumulator cylinder which
controls two other Hydraulic cylinders connected to Lower
roll carries. Power pack can also be provided (optionally).
- A Hydraulic Gauge is also provided on lower guard for easy
view.
- The machine is having anti vibrating mounts.
- The machine is having excellent bottom driven force feeding
system for material feeding. However, Gravity type feeding
also can be provided (optionally).
- Two layer attachment can also be provided (optionally).
- The machine is having excellent paint, inside wherever it
is required.
- The machine has been designed as to minimize the change
over time. The weight adjustment section is easily removable
which provides good access for the removal / replacement of
lower punches & dies, away form compression zone.
- The hand wheel is conveniently located for indexing the
turret during tool change over with single operator.
- The machine is having specially designed Dust Extractor
Nozzle which can be connected with the dust extractor, away
from machine.
- The machine is having Elegant Lock & Operator friendly
design and is manufactured in such a manner that is gives
all satisfaction to the operator while the production.
- The machines are backed by excellent after sales service.
|
| |
| Technical Details
: |
| |
|
|
|
|
|
 |
Machine Type |
High
Speed Double Rotary |
|
No of Station |
37 |
45 |
55 |
61 |
|
Type of Tooling Punch |
"D" |
"B" |
"BB" |
"BB" |
|
Output - Tablet per Hour |
80,000 to 2,22,000 |
96,000 to 3,24,000 |
1,20,000 to 3,95,000 |
1,32,000 to 4,38,000 |
|
Max. Operating Pressure |
10 Tons |
6.5 Tons |
6.5 Tons |
6.5 Tons |
|
Max. Tablet Dia |
13/16" (20.5 mm) |
11/16" (17.5 mm) |
11/16" (17.5 mm) |
11/16" (17.5 mm) |
|
Maximum Depth of Fill |
25 mm |
5/8" (15.9 mm) |
7/16" (11.1 mm) |
7/16" (11.1 mm) |
|
Upper Punch Penetration |
1/8" to 5/16" |
1/8" to 5/16" |
1/8" to 5/16" |
1/8" to 5/16" |
| |
|
(3.2 to 8 mm) |
(3.2 to 8 mm) |
(3.2 to 8 mm) |
(3.2 to 8 mm) |
|
Power (Total) |
7 KW / 9.5 hp. |
7 KW / 9.5 hp. |
7 KW / 9.5 hp. |
7 KW / 9.5 hp. |
|
Power Main Electric Motor |
55
KW / 7.5 HP, 3 Phase, 1440 RPM, 415 V., 50 Hz |
| |
Power (Feeder Motors 2 nos.) |
0.19
KW / 0.25 hp., 1440 RPM, 415 V., 50 hz, 3 Ph. |
|
Overall H x W x D (Approx.) |
Guard
Open : 2080 mm x 2300 mm x 1485 mm h |
|
Overall H x W x D (Approx.) |
Guard
Close: 1742 mm x 1430 mm x 1485 mm h |
|
Net Weight (Approx.) |
2500
kgs |
|
Case Dimensions (cs) |
168
x 138 x 224 h |
|
Gross Weight |
2835
Kg |
|
|
